 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Solid State Relay OCMOS FET PS7341C-1A,PS7341CL-1A CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET DESCRIPTION The PS7341C-1A and PS7341CL-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs including current control circuit on the output side. Current control circuit of OCMOS FET protects this device from thermal breakdown and output circuit. They are suitable for analog signal control because of their low offset and high linearity. The PS7341CL-1A has a surface mount type lead. FEATURES * Limit current (ILMT = 125 to 250 mA) * High isolation voltage (BV = 3 750 Vr.m.s.) * 1 channel type (1 a output) * Low LED operating current (IF = 2 mA) * Designed for AC/DC switching line changer * Small package (6-pin DIP) * Low offset voltage * PS7341CL-1A: Surface mount type * UL approved: File No. E72422 (S) * BSI approved: No. 8252/8253 * CSA approved: No. CA 101391 APPLICATIONS * Exchange equipment * Measurement equipment * FA/OA equipment Document No. PN10308EJ01V1DS (1st edition) (Previous No. P12934EJ5V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS7341C-1A,PS7341CL-1A PACKAGE DIMENSIONS (in millimeters) PS7341C-1A 9.250.5 TOP VIEW 6 5 4 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 1 2 3 7.62 6.50.5 3.30.3 4.150.3 3.50.3 0.50.1 1.340.1 0.25 M 0 to 15 2.54 PS7341CL-1A 9.250.5 6 5 4 TOP VIEW 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 1 2 3 6.50.5 3.50.3 1.340.1 0.25 M 2.54 0.90.25 9.600.4 2 Data Sheet PN10308EJ01V1DS 0.10+0.10 -0.05 PS7341C-1A,PS7341CL-1A ORDERING INFORMATION (Solder Contains Lead) Part Number PS7341C-1A PS7341CL-1A PS7341CL-1A-E3 PS7341CL-1A-E4 Embossed Tape 1 000 pcs/reel Package 6-pin DIP Packing Style Magazine case 50 pcs Application Part Number PS7341C-1A PS7341CL-1A *1 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS7341C-1A-A PS7341CL-1A-A PS7341CL-1A-E3-A PS7341CL-1A-E4-A Embossed Tape 1 000 pcs/reel Package 6-pin DIP Packing Style Magazine case 50 pcs Application Part Number PS7341C-1A PS7341CL-1A *1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10308EJ01V1DS 3 PS7341C-1A,PS7341CL-1A ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Diode Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current MOS FET Break Down Voltage Continuous Load Current *2 *1 Symbol IF VR PD IFP VL Connection A Connection B Connection C IL Ratings 50 5.0 50 1 400 120 120 240 Unit mA V mW A V mA Pulse Load Current *3 ILP 120 mA (AC/DC Connection) Power Dissipation Isolation Voltage *4 PD BV PT TA Tstg 560 3 750 610 -40 to +85 -40 to +125 mW Vr.m.s. mW C C Total Power Dissipation Operating Ambient Temperature Storage Temperature *1 PW = 100 s, Duty Cycle = 1 % *2 Conditions: IF 2 mA. The following types of load connections are available. 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 4 6 5 4 6 5 IL L - + VL (DC) Connection A IL VL (AC/DC) L L + VL (DC) - IL Connection B IL L IL + IL Connection C + VL (DC) - 4 IL *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output 4 Data Sheet PN10308EJ01V1DS PS7341C-1A,PS7341CL-1A RECOMMENDED OPERATING CONDITIONS (TA = 25 C) Parameter LED Operating Current LED Off Voltage Symbol IF VF MIN. 2 0 TYP. 10 MAX. 20 0.5 Unit mA V ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Forward Voltage Reverse Current MOS FET Off-state Leakage Current Output Capacitance Coupled LED On-state Current On-state Resistance Symbol VF IR ILoff Cout IFon Ron1 Ron2 Turn-on Time Turn-off Time *1 *1 Conditions IF = 10 mA VR = 5 V VD = 400 V VD = 0 V, f = 1 MHz IL = 120 mA IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 120 mA, t 10 ms IF = 10 mA, VO = 5 V, RL = 2 k, PW 10 ms VI-O = 1.0 kVDC V = 0 V, f = 1 MHz IF = 10 mA, t = 5 ms, VL = 6 V MIN. TYP. 1.2 MAX. 1.4 5.0 Unit V A A pF 0.001 63 1.0 2.0 27 22 0.55 0.07 10 9 mA 35 30 1.0 1.0 ton toff RI-O CI-O ILMT ms Isolation Resistance Isolation Capacitance Limit Current *2 1.1 pF 250 mA 125 200 *1 Test Circuit for Switching Time IF Pulse Input VL Input 50 % 0 VO = 5 V Input monitor VO monitor Output 90 % Rin RL ton toff 10 % *2 N rank : 125 to 250 mA M rank : 125 to 180 mA L rank : 170 to 250 mA Data Sheet PN10308EJ01V1DS 5 PS7341C-1A,PS7341CL-1A TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERTURE 100 300 MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERTURE Maximum Load Current IL (mA) Maximum Forward Current IF (mA) 80 200 60 40 100 20 0 -25 0 25 50 75 85 100 0 -25 0 25 50 75 85 100 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD VOLTAGE vs. AMBIENT TEMPERTURE 1.8 200 OUTPUT CAPACITANCE vs. APPLIED VOLTAGE f = 1 MHz Forward Voltage VF (V) 1.6 Output Capacitance Cout (pF) 1.4 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 150 100 1.2 1.0 50 0.8 -25 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature TA (C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 10-6 LOAD CURRENT vs. LOAD VOLTAGE IF = 10 mA, t = 5 ms 200 Off-state Leakage Current ILoff (A) TA = 85 C Load Current IL (mA) 10-7 100 10-8 -8.0 -4.0 -100 0 4.0 8.0 10-9 25 C -200 10-10 0 100 200 300 400 500 Load Voltage VL (V) Applied Voltage VD (V) 6 Data Sheet PN10308EJ01V1DS PS7341C-1A,PS7341CL-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERTURE 3.0 Normalized On-state Resistance Ron ON-STATE RESISTANCE DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, IL = 10 mA 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, IL = 10 mA Number (pcs) 25 20 15 10 5 0 0 25 50 75 100 27 29 Ambient Temperature TA (C) On-state Resistance Ron () TURN-ON TIME vs. FORWARD CURRENT 12 VO = 5 V 10 Turn-on Time ton (ms) Turn-off Time toff (ms) TURN-OFF TIME vs. FORWARD CURRENT 0.30 VO = 5 V 0.25 0.20 0.15 0.10 0.05 8 6 4 2 0 5 10 15 20 25 30 0 5 10 15 20 25 30 Forward Current IF (mA) Forward Current IF (mA) TURN-ON TIME DISTRIBUTION 30 25 Number (pcs) TURN-OFF TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V n = 50 pcs, IF = 10 mA, VO = 5 V Number (pcs) 25 20 15 10 5 0 20 15 10 5 0 0.5 0.7 0.07 0.08 Turn-on Time ton (ms) Turn-off Time toff (ms) Data Sheet PN10308EJ01V1DS 7 PS7341C-1A,PS7341CL-1A NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERTURE 3.0 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERTURE 3.0 Normalized Turn-on Time ton Normalized Turn-off Time toff 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) NORMALIZED LIMIT CURRENT vs. AMBIENT TEMPERTURE 3.0 Normalized Limit Current ILMT 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, t = 5 ms, VL = 6 V 0 25 50 75 100 Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10308EJ01V1DS PS7341C-1A,PS7341CL-1A TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.00.1 4.00.1 1.5 +0.1 -0 1.750.1 4.5 MAX. 16.00.3 7.50.1 10.30.1 1.550.1 12.00.1 10.40.1 0.3 4.00.1 Tape Direction PS7341CL-1A-E3 PS7341CL-1A-E4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 3302.0 1001.0 R 1.0 21.00.8 17.51.0 21.51.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10308EJ01V1DS 9 PS7341C-1A,PS7341CL-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10308EJ01V1DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of PS7341CL-1A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |